From 11a4bf7870191f44dc89faabba7197005a017d0f Mon Sep 17 00:00:00 2001
From: "Haoran S. Diao" <0@hairydiode.xyz>
Date: Sun, 24 Nov 2019 05:08:35 -0800
Subject: Initial commit

---
 Makefile   |  8 ++++++
 README     |  4 +++
 calwrapper | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 getcalpass |  2 ++
 getcaluser |  2 ++
 5 files changed, 109 insertions(+)
 create mode 100644 Makefile
 create mode 100644 README
 create mode 100755 calwrapper
 create mode 100755 getcalpass
 create mode 100755 getcaluser

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..1e5f909
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,8 @@
+install: calwrapper getcalpass getcaluser
+	mkdir /etc/calwrapper
+	cp getcalpass /etc/calwrapper/getcalpass
+	cp getcaluser /etc/calwrapper/getcaluser
+	cp calwrapper /usr/bin/calwrapper
+uninstall: calwrapper getcalpass getcaluser
+	rm -r /etc/calwrapper
+	rm /usr/bin/calwrapper
diff --git a/README b/README
new file mode 100644
index 0000000..5f89b1a
--- /dev/null
+++ b/README
@@ -0,0 +1,4 @@
+Calwrapper is a file intended to be run manually that will periodically call
+vdirsyncer to sync locally a remote calDAV .ics store. It stores the username
+and password in environmental variables so it isn't the most secure, but it'
+more secure than storing it in a plainttext file. To install, run make.
diff --git a/calwrapper b/calwrapper
new file mode 100755
index 0000000..da0a46c
--- /dev/null
+++ b/calwrapper
@@ -0,0 +1,93 @@
+#!/bin/bash
+#state variable that determines if the main loop is running
+loop=true
+#time of next update
+nexttime=$(date +%s)
+#intervals between updates in seconds
+interval=60
+#time before an starts before a notification pops up
+remind=900
+#gets username and password
+read -p  "username:" caluser
+export caluser
+read -s -p "password:" calpass
+echo ""
+export calpass
+#This has to be done at the beginning of every run of the script now, don't know
+#why, but if it isn't then vdirsyncer sync will refuse to run
+vdirsyncer discover
+#help message
+echo "Beginning to sync up caledar files, type \"q\" + enter to quit,
+\"s\" + enter to sync now,
+\"k\" + enter to launch khal in interactive mode,
+and \"a\" + enter to list agenda"
+while [ "$loop" == true ]; do
+	#w/ timeout of 1, read input 
+	read  -t 1 input
+	#handles quit, this is run at every loop and pretty much determines how
+	#slow the loop runs
+	if [ "$input" == "q" ]; then
+		loop=false
+	fi
+	if [ "$input" == "k" ]; then
+		khal interactive
+		#in case anything was editted
+		nexttime=$(date +%s)
+	fi
+	if [ "$input" == "a" ]; then
+		khal calendar
+	fi
+	if [ "$input" == "s" ]; then
+		nexttime=$(date +%s)
+	fi
+	#If the current time is greater than the next scheduled update, update
+	if [ $(date +%s) -ge $nexttime ]; then
+		echo starting sync at $(date +%s)
+		#syncs with remote calDAV server
+		vdirsyncer sync
+		#stores the old list of upcoming events so that we can compare
+		#after updating, this will create an error on the first run but
+		#this doesn't matter
+		mv ~/.vdirsyncer/events ~/.vdirsyncer/oldevents
+		#updates khal and also list any upcoming events
+		#determines in seconds the interval of time that khal limits
+		#itself to when looking for events (their start times have have
+		#to fall within this interval)
+		window=$(( (interval) * 3 ))s
+		#determines the time which khal is actually querying, this
+		#should be now + remind before time, window does not matter
+		#because we're testing for when an event passes out of the
+		#interval
+		testtime=$(( $(date +%s) + $remind ))
+		#now get the properly formated string representing the above
+		#time in a way khal understands
+		#Note: The below only works if the time format is set to be the
+		#same way in khal's config
+		timestring=$(date --date="@$testtime" "+%m/%d/%Y %I:%M %p")
+		echo Testing for upcoming events at $timestring
+		#writes upcoming events to events file to be diffed later
+		khal list $now $timestring --once --notstarted >> ~/.vdirsyncer/events
+		#checks to see if any changes in the upcoming events queue
+		#exists by diff'ing oldevents and events, then finding what was
+		#removed
+		difference=$(diff ~/.vdirsyncer/oldevents ~/.vdirsyncer/events | grep "<")
+		#only when an event is exiting the test interval do we care, so
+		#if $difference is "< No events" or empty, then we say that
+		# an event entered the interval or no change occured
+		#Schedules the next update, keeps adding $interval until we get
+		#one that's actually in the future, since it's not guaranteed
+		#that each update will take less than 1 $interval to run
+		if [ "$difference" == "" ]; then
+			echo No changes in upcoming events
+		elif [ "$difference" == "< No events" ]; then
+			echo an event entered the test interval
+		else
+			echo an event has exited the test interval
+			notify-send "$difference"
+		fi
+		while [ $(date +%s) -ge $nexttime ]; do
+			nexttime=$(( $nexttime + $interval))
+		done
+		echo next sync scheduled at $nexttime
+	fi
+done
diff --git a/getcalpass b/getcalpass
new file mode 100755
index 0000000..4a8cb96
--- /dev/null
+++ b/getcalpass
@@ -0,0 +1,2 @@
+#!/bin/bash
+echo -n $calpass
diff --git a/getcaluser b/getcaluser
new file mode 100755
index 0000000..f2360a2
--- /dev/null
+++ b/getcaluser
@@ -0,0 +1,2 @@
+#!/bin/bash
+echo -n $caluser
-- 
cgit v1.1