skey.git - Linux Kernel Module for the Keyboard of the Omnicom

Age	Commit message (Collapse)	Author
2017-12-27	set pin 4 and 15 to have low values to, this might not actually run.	knolax

2017-12-27	after switching the position of 4 in column_pins[10] the problem persisted, ↵	knolax
	i have added lines at the end of init_skey() that explictly set those two pins as input, this is to help debug the issue]
2017-11-14	reverted the inverted row pins, the issue was not one of ↵	knolax
	active_low/active_high, but an incomplete transition to using column pins for input and row pins for output. everything works except for columns 7 and 9(pins 15 and 4) which are always held detected as hgih. testing with the /sysfs interface has shown that pin 4 is electrically sound so it must be an issue with the driver# Please enter the commit message for your changes. Lines starting
2017-12-23	fixed typo	knolax

2017-12-23	fixed typo	knolax

2017-12-23	fixed testing setup	knolax

2017-12-23	hopefully fixed setting pins as opposite of what they are, thereby fixing ↵	knolax
	the issue of the iutput pins not working
2017-12-23	making a test, gpio output seems unresponsive at all	knolax

2017-12-23	switched the output pin states as they might be considered active_low in the ↵	knolax
	legacy gpio interfacd
2017-12-23	fixed typo	knolax

2017-12-23	changed the function calls to the linux gpio interface to their cansleep ↵	knolax
	equivalents
2017-12-20	added a small sleep between rpin state changes	knolax

2017-12-20	fixed typo	knolax

2017-12-20	reversed the roles of the row and column pins to account for an error in the ↵	knolax
	prototype board.
2017-12-19	changed tick rate of update thread for testing purposesHEAD master	knolax

2017-12-13	reenabled gpio testing	knolax

2017-12-13	confirmed that adding the metadata allows X11 to autodetect skey_dev	knolax

2017-12-13	removed __initdata from all the variables because none of them are actually ↵	knolax
	only used during init
2017-12-13	added more metadata to skey_dev, also added __initdata to some variables	knolax

2017-12-08	fixed a typo, has it emmit capslock every second	knolax

2017-12-08	added code to register a device with input.h	knolax

2017-12-08	added a counter that printks every second, the previous kernel panics may ↵	knolax
	have been caused by excessive use of printk.
2017-12-08	changed test mode warning to only emit once during the thread	knolax

2017-12-08	added test mode that doesn't use GPIO so i can test on an Virtual Machine on ↵	knolax
	my main computer
2017-12-07	changed the update function from being timer based to thread based so that ↵	knolax
	it can sleep. it may be because of the fact that it couldn't sleep that it was causing kenel panics
2017-12-07	added functions to explicitly set pins as input or output do to kernel ↵	knolax
	panics when trying to use gpio_set_value()
2017-12-07	added basic keypress scanning functionality to the update function	knolax

2017-12-07	initial commit	knolax